- Ikea Ottawa, Frisby TireOttawa, Ontario
- Event Tents and StagesOttawa, Ontario
- Trudell Medical InternationalLondon, Ontario
Project Case Studies
Cold formed structural steel racking systems can be found in almost every retail store and storage warehouse throughout the city. These pre-engineered proprietary racking assemblies are modular and relatively simple to assemble with few parts. In many cases, the anchorage of the racking base plates to the base building structure is required to reviewed and certified by a local professional engineer prior to their use. Cleland Jardine Engineering Ltd. works closely with cold formed steel racking suppliers and installers to review and approve the installation of the installed racking assemblies for compliance with CSA A344.1, industry standards and for their intended use. Some of the more notable racking installation projects that Cleland Jardine Engineering Ltd. have been involved in include the Ikea Ottawa warehouse racking and Frisby Tire warehouse storage.
Each summer, Ottawa hosts a number of music and outdoor festival events including The Ottawa Jazz Festival, the Ottawa Children’s Festival, and the Escapade Music Festival. At many outdoor festivals and events, the organizers erect large tents to allow for the performances to proceed rain or shine and add to the atmosphere In many cases, large stages are also required to create a large open air concert setting. Over the past several years, Cleland Jardine Engineering Ltd. has been retained by the organizers of The Ottawa Jazz Festival, the Ottawa Children’s Festival and the Escapade Music Festival to review and certify the erection and installation of the large event tents and custom stages.
Many medical facilities have specialized clean rooms that can be used to prevent the spread of deadly diseases or to store medical supplies. These clean rooms may be built into the original structure or can be separate structures installed within the building. Cleland Jardine Engineering Ltd. was retained to provide a structural review of one of these clean room structures which was installed within the Trudell Medical International Building in London, Ontario. The clean room consisted of a 30’ square box measuring 10’ tall. The structural elements of the room were built with extruded aluminum shapes connected together using nylon inserts at the connection points. Cleland Jardine Engineering reviewed all of the structural elements for dead loads of the room as well as the lateral loads imposed by seismic and interior wind pressures.